3 Reasons Why Your Smoke Detection Alarm Triggers False Alarms



Does your oh-so-reliable smoke alarm unit (be it a photoelectric smoke alarm or any other) trigger false alarms for no apparent reason...?

If it does, then you should know that you're not the only one troubled with those falsely occurring triggers.


Be it nails on the chalkboard... The sound of grinding teeth... Or be it anything which causes a cringe-worthy sound.... nothing in this world can hold a candle to the irritable shriek caused by a false alarm!

While it is understandable that such sounds are meant to catch your attention, if it happens more often than not, particularly without any real emergency, then it can prove both frustrating and frightening.


THE GOOD NEWS is that you don't need to subject yourself to this annoyance. Experts specialising in interconnected photoelectric smoke alarms near you in Gold Coast point out these 5 reasons why your smoke alarm unit triggers false alarms.

Follow closely!


Reason 1 - When Your False Alarm Is Located Within 10-Feet Of A Cooking Appliance.


Those cooking appliances can be anything ranging from a stove, toaster, oven. If you have installed a photoelectric smoke alarm unit at your residence, then they are very much capable of detecting a sudden spike in temperature in that portion of the house.


This makes your smoke alarm unit more responsive to a rise in temperature and causes the false alarm to trigger unexpectedly.


Special mentioning - Also avoid installing your photoelectric smoke alarm (or any standard smoke alarm unit). It can also cause false alarm triggers. 


Reason 2 - When Your Smoke Alarm Unit Detects Burned Or High Humidity.


Every time your installed smoke unit detects burned or overcooked food, it can trigger a false alarm. So, the recommended course of action would be to keep your smoke alarm unit as far away from the cooking area as possible.


If the room has space shortage, then maintain at least 10 feet distance from the cooking zone.

Similarly, high steam or humidity tend to carry dense moisture which confuses your smoke alarm unit into considering them as smoke particles. 


So, if you have a smoke alarm unit installed right outside your steam bathing space, look to shift it to a different location.


Reason 3 - Pesky Insects Or Presence Of Strong Chemical Odour Nearby.


Many times, small insects can enter the smoke detection chamber and accidentally set off a false alarm due to interference with the alarm sensors. To be sure, check your smoke alarm chamber properly and remove any pesky insects crawling inside it.


In addition to this, you need to keep your smoke unit away from spots which give out a strong chemical odour. Smoke detectors are very sensitive to such air particles and can even set of false alarms unexpectedly. So be watchful of this aspect too.


Final Lines  


These are some of the common reasons why your smoke alarm unit sets off false triggers. Keep these in mind to avoid such unwanted nuisances. 

And for more information and installation tips, speak to your local interconnected photoelectric smoke alarms installation specialists near you in Gold Coast.

Location: Gold Coast QLD, Australia

Comments

Post a Comment

Popular posts from this blog

How do Interconnected photoelectric smoke alarms work?

Image
Smoke detectors are one of those amazing inventions that play a huge part in your fire protection project. All smoke detectors consist of two basic parts: a sensor to detect smoke and an electronic audible alarm to alert people. Usually large commercial buildings, hospitals, shopping malls count on Interconnected photoelectric smoke alarms installation Gold Coast service to install this equipment. But, do you know about this equipment and how it works. Read below! Interconnected photoelectric detector It works from an infrared light beam and a sensor. When in contact with smoke, the beam disperses, sensor detect this and causes the alarm to go off. In a more technical way, the detector works based on the Tyndall effect that is observed inside a camera obscura with photoelectric elements that act in the infrared range. If there is smoke in the place where the detector is installed, particles dispersed in the air due to combustion will be detected by the electronic circuit and the a...
Read more

Red Smoke Alarm Controller- Best Products To Check

Image
  There are numerous instances where smoke alarms save our lives. For instance, it protects us from potential fire breaks. Similarly, it helps us avoid the over inhalation of smoke. But sometimes we come across unwanted hassles due to false alarms and this is where smoke alarm controllers step in. However, choosing the best smoke alarm controller amongst all is an overwhelming task as there are numerous options to explore.  Thus, to make it easier for you, we are about to provide you with a list of red  smoke alarm controllers on Gold Coast . Amongst them, you have to choose the one that goes best with your requirements. We assure you that going through the list will help you make the right decision. So, here is the list of the products that you need to know. Red R10RF Photoelectric Wireless Smoke Alarm  It is one of the best products on the list. We assure you that buying this product can never go wrong. It comprises numerous attractive features that will serv...
Read more